Main
Main Categories
Main
Showing all 8 results
- Water Heaters
Fan Flue Kit for FF Model
The flue must be installed as specified in BS 5440:Part 1.
The terminal must not cause an obstruction nor the discharge cause a nuisance.
If the terminal is fitted within 1000 mm of a plastic or painted gutter or within 500 mm of painted eaves then an aluminum shield at least 1000 mm long should be fitted to the underside of the gutter or painted surface.
If a terminal is fitted less than 2 meters above a surface to which persons have access then a guard must be fitted.
The terminal guard must be evenly spaced about the flue terminal and fixed to the wall using plated screws.
In certain weather conditions, a terminal may plume when the appliance is operated. Siting where this could cause a nuisance should be avoided.
Take care to ensure that combustion products do not enter ventilated roof voids.SKU: Fan Flue Kit for FF Model - Main Unvented Cylinders
Main 300 LTR Unvented Cylinder
The new Main unvented hot water cylinders are designed to deliver today’s hot water requirements to a range of domestic properties. The coil-in-coil heat exchanger ensures rapid heat recovery whilst promoting boiler efficiency.
To help save the environment and minimize fuel bills, 50mm of factory injected polyurethane foam ensures that heat loss and running costs are kept to a minimum.SKU: Main 300 LTR Unvented Cylinder - Water Heaters
Main Balanced Flue Terminnal 9″ – 15″
Main Balanced Flue Terminal 9″ – 15″.
Balanced Flue for Main Water Heater BF Model.
The flue must be installed as specified in BS 5440:Part 1.
If the terminal discharges onto a pathway or the passageway, check that the combustion products will not cause a nuisance and that the terminal will not cause an obstruction.
If the terminal is fitted within 850 mm of a plastic or painted gutter or within 450 mm of painted eaves then an aluminium shield at least 750 mm long should be fitted to the underside of the gutter or painted surface.
If a terminal is fitted less than 2 meters above a surface to which persons have access then a guard must be fitted.
The terminal guard must be evenly spaced about the flue terminal and fixed to the wall using plated screws.
Under certain weather conditions, the terminal may plume when the appliance is operated. Siting where this could cause a nuisance should be avoided.
Take care to ensure that combustion products do not enter ventilated roof voids by positioning the flue away from any soffit vents.
SKU: Main Balanced Flue Terminnal 9" - 15" - System Boilers
Main Eco Compact 15 System Boiler
The new cupboard fit Main Eco Compact System boiler is the perfect choice for homes with more than one bathroom, to satisfy all its hot water needs.
It is easy to install and service, with front access to all components and central top flue, while its five-year warranty*, good looks, and simple controls make it the perfect choice for householders.SKU: Main Eco Compact 15 System Boiler - System Boilers
Main Eco Compact 18 System Boiler
The new cupboard fit Main Eco Compact System boiler is the perfect choice for homes with more than one bathroom, to satisfy all its hot water needs.
It is easy to install and service, with front access to all components and central top flue, while its five-year warranty*, good looks, and simple controls make it the perfect choice for householders.SKU: Main Eco Compact 18 System Boiler - Combi Boilers
MAIN ECO COMPACT 25 COMBI BOILER with Std. FLUE
MAIN ECO COMPACT 25 COMBI BOILER with Std. FLUE.
Tried and tested technology, this boiler is cupboard-fit, lightweight, compatible with Baxi uSense wired smart thermostat, and has a five-year warranty.*
SKU: MAIN ECO COMPACT 25 COMBI BOILER with Std. FLUE - Combi Boilers
MAIN ECO COMPACT 30 COMBI BOILER with Std. FLUE
MAIN ECO COMPACT 30 COMBI BOILER with Std. FLUE.
Tried and tested technology, this boiler is cupboard-fit, lightweight, compatible with Baxi uSense wired smart thermostat, and has a five-year warranty.*
SKU: MAIN ECO COMPACT 30 COMBI BOILER with Std. FLUE
