Gas Fittings
Gas Fittings Categories
Gas Fittings
Showing all 8 results
- Gas Fittings
GAS Adaptor Gas 3/4 BSP M x 25mm MDPE Galvanized
A range of compression fittings to join yellow gas MDPE pipe together and for transition; i.e. to join yellow gas MDPE pipe to steel pipe (pipe to BS EN 10255:2004(BS 1387:1985), DIN 2440/2441/2442/2448 Series 1 or 2458 Series 1). Fittings are made by a BS EN ISO 9001:2008 registered company. The pipe is inserted into the fitting to the predetermined length and the nut tightened. Special tools are not required. Instructions are supplied with each fitting. Fittings for use with MDPE pipes are supplied complete with insert stiffeners.
Suitable for Natural Gas and LPG.
Nut and body material: Black Malleable Iron or galvanized.
Maximum pressure at 20°C 7 bar (maximum operating pressure is dependent on MDPE pipe specification and standard).
Angular deflection: the joint will cope with a misalignment of the connected pipe of up to 6° inclusive.
Seal material: Nitrile compound.
Threads: Male, BSP taper to BS 21 (ISO 7-1) female, BSP parallel to BS 21 (ISO 7-1).
Temperature range: -20 to 40°C.
SKU: GAS Adaptor Gas 3/4 BSP M x 25mm MDPE Galvanized - Gas Meter Fittings
Gas Domestic Angle Meter Regulator – 3 /4
Angle type regulators designed for low-pressure domestic meter applications. Conforms to PRS 3/E, and is in accordance with BS EN 88:1991. This product is suitable for installation onto G1.6, G4, U6, and E6.G130 meters. Brass meter adaptors and washers must be purchased separately.
The standard unit is supplied with the outlet pressure set and sealed at 21 mbar. Adjustment is possible by breaking the seal and, using a screwdriver, turning the spring load adjuster under the top cap. Threads are BSP taper female to BS 21:1985.
SKU: Gas Domestic Angle Meter Regulator - 3 /4 - Gas Meter Fittings
Gas Flexible Meter Connector 3/4
3/4″ BS 746 nut/liner x 3/4″ BSP taper male, 455 mm.
Convoluted stainless steel hose conforms to BS EN ISO 10380:2003 with end connections to BS 746:2005+A1:2009 (nut and liner) and BSP taper male thread to ISO 7-1:1994. Supplied without a wash
Flexible Meter Connector – 3/4″ x 1″
Flexible Meter Connector – 1″ x 3/4″
Flexible Meter Connector – 1.1/4″
Flexible Meter Connector – 2″
SKU: Gas Flexible Meter Connector 3/4 - Gas Meter Fittings
Gas Meter Control Valves Domestic EVC 1
1″ BSP TF x BS 746 M straight ball valves designed to function as a fire-safe meter control valve, certified to GIS/V7-3:2007 and high temperature resistant to EN 1775:2007, Annex A, procedure B.
Body brass to BS EN 12165:1998 CW617N.
Operating temperature: -20 to 60°C.
Max. operating pressure: 0.5 bar.
For Natural Gas and LPG.
Domestic Meter Control Valve ECV – 1″ x 3/4″
Domestic Meter Control Valve ECV – 3/4″
Domestic Meter Control Valve ECV – 1″
SKU: Gas Meter Control Valves Domestic EVC 1 - MDPE Yellow
George Fischer Primofit 1/2″ BSP Male x 20mm MDPE GAS Galvanized
A range of compression fittings to join yellow gas MDPE pipe together and for transition; i.e. to join yellow gas MDPE pipe to steel pipe (pipe to BS EN 10255:2004(BS 1387:1985), DIN 2440/2441/2442/2448 Series 1 or 2458 Series 1). Fittings are made by a BS EN ISO 9001:2008 registered company. The pipe is inserted into the fitting to the predetermined length and the nut tightened. Special tools are not required. Instructions are supplied with each fitting. Fittings for use with MDPE pipes are supplied complete with insert stiffeners.
SKU: George Fischer Primofit 1/2" BSP Male x 20mm MDPE GAS Galvanized - Gas Fittings
Primofit Adaptor Gas 1 BSP M x 32mm MDPE Galvanized
A range of compression fittings to join yellow gas MDPE pipe together and for transition; i.e. to join yellow gas MDPE pipe to steel pipe (pipe to BS EN 10255:2004(BS 1387:1985), DIN 2440/2441/2442/2448 Series 1 or 2458 Series 1). Fittings are made by a BS EN ISO 9001:2008 registered company. The pipe is inserted into the fitting to the predetermined length and the nut tightened. Special tools are not required. Instructions are supplied with each fitting. Fittings for use with MDPE pipes are supplied complete with insert stiffeners.
Suitable for Natural Gas and LPG.
Nut and body material: Black Malleable Iron or galvanized.
Maximum pressure at 20°C 7 bar (maximum operating pressure is dependent on MDPE pipe specification and standard).
Angular deflection: the joint will cope with a misalignment of the connected pipe of up to 6° inclusive.
Seal material: Nitrile compound.
Threads: Male, BSP taper to BS 21 (ISO 7-1) female, BSP parallel to BS 21 (ISO 7-1).
Temperature range: -20 to 40°C.SKU: Primofit Adaptor Gas 1 BSP M x 32mm MDPE Galvanized - Gas Fittings
U6 Primary Meter Fixing Kit – Ports 152.4mm Apart
Meter reads in cubic meters. Inlet and outlet connections are 152.4 mm apart (as historically on British Gas domestic installations).
For use with Natural Gas only.
Gas meter included.
If a meter box is needed, please order separately, P/N 8310 for built-in or P/N 9357 for wall-mounted.SKU: U6 Primary Meter Fixing Kit - Ports 152.4mm Apart